Boondocker YAMAHA: Apex Turbo Manuel d'utilisateur télécharger pdf (Page 7)

BoonDocker – 1585 Hollipark Dr. Idaho Falls, ID 83401 – 208-542-4411 / 877-522-7805

www.boondockers.com – email: [email protected]m – fax: 208-524-7381

Revised 05-07-07 Page 7 of 16

Selecting Stats from the Main Menu will first display the following screen with real “Run-time” data (current

conditions):

Run 35/40 10.2NA

5500 MD █ █ █ 10

line

Run “

Run” indicates display is in Run mode. If in capture mode, “Cap” will be displayed.

35 Input duty cycle in percent

40 Output duty cycle in percent

10.2 Current Boost Pressure

N If “N” displayed, Nitrous is on

A If “A” displayed, Accelerator Pump Fuel adjustment is on

line

5500

RPM (note, if the engine is shut off, the last recorded RPM may be displayed)

MD Engine Load. LO, MD, or HI will be displayed.

█ █ █ These bars are a graphic display of LO, MD, or HI as shown below:

MD █ █ █

HI █ █ █ █ █ █

10 Current Fuel Adjustment

Run/Capture mode:

Left-Arrow button : Sets Capture Mode, “Cap” will be displayed and the current data will be frozen on the

display. The capture occurs on the display when the button is released (data will continue to

be captured if the button is held down). It will stay in capture mode (data will remain frozen)

until the Right-Arrow is pressed to return to Run mode or until the Control Box is re-

powered. If the Stats menu is re-entered before the engine is shut off and the box is in

Capture mode, the last captured data will be displayed.

Right-Arrow button: Clears capture mode (captured data will be lost!) and sets Run mode

. “Run” will be

displayed and real-time data will be displayed. Note: The Button Mode can also be

configured to Capture the Status screen Press SEL to go to the next screen: Stats: MAX.

3.2 Stats: MAX

Any button press from the Run screen will go to the next Stats screen which is the Max screen, displaying max

RPM, Duty Cycle In from the sled’s ECU, and Duty Cycle Out to the injectors.

MAX:DCIn/Out Clr.

5500 35/45 YÆN.

MAX: 5500 Max rpm

DCIn 35 Max Duty Cycle Input from sled’s ECU.

DCOut 45 Max Duty Cycle Output to the injectors.

These max values will be saved when the box is shut off so they will remain the next time this screen is displayed

even if the box is re-powered. Peak values or “spikes” are filtered by finding the average during a certain time-

window. Therefore, a maximum must be held for at least 1 second to be recorded and displayed properly.

Use the arrow keys to move the cursor between Y and N. Pressing SEL when the cursor is on Y will clear the max

values. Pressing SEL when the cursor is on N takes you to the next screen: Stats: N2O/TPS.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

Boondocker YAMAHA: Apex Turbo Manuel d'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement aérien Boondocker YAMAHA: Apex Turbo